Angle Frame Manlift Parts List

Head Assembly

• SAH-6
  Head Assembly Complete - GHC-3-RA
  
  NEMA 4 (Weatherproof) or
  NEMA 12 (Dust-tight):
  For 12" Belt Manlift
  For 14" Belt Manlift
  For 16" Belt Manlift
  NEMA 7 (Explosive-Vapors) or NEMA 9 (Explosive-Dust)
  For 12" Belt Manlift
  For 14" Belt Manlift
  For 16" Belt Manlift
  
  
• SAH-6
  Head Assembly Complete - GHC-5-RA
  
  NEMA 4 (Weatherproof) or
  NEMA 12 (Dust-tight):
  For 12" Belt Manlift
  For 14" Belt Manlift
  For 16" Belt Manlift
  NEMA 7 (Explosive-Vapors) or NEMA 9 (Explosive-Dust):
  For 12" Belt Manlift
  For 14" Belt Manlift
  For 16" Belt Manlift

PLEASE NOTE: Above are the base prices for standard Humphrey Head Assemblies with 8" channel bedplates, 6'3" long.  Does not include option for "Saf-T-Stop" Brake and related material.  Prices for non-standard Head Assemblies are available upon request.

• SAH-6B-A (Item #15)
  Head Pulley Complete - 12" x 20"
  
  For 12" Belt Manlift - 2 3/16" Bore - Lagged
  
  
• SAH-6B-B
  Head Pulley Complete - 12" x 20"
  
  For 12" Belt Manlift - 2-11/16" Bore - Lagged
  
  
  
• SAH-6B-D
  Head Pulley Complete - 12" x 20"
  
  For 12" Belt Manlift - 1-15/16" Bore-Lagged
  
  
  
• SAH-6B-OH-NL
  Head Pulley Complete - 12" x 20"
  
  For 12" Belt Manlift - 2-15/16" Bore - Oversized Hub - Not Lagged
  
  
  
• SAH-6B1-B
  Head Pulley Complete - 14" x 20"
  
  For 14" Belt Manlift - 2-11/16" Bore - Lagged
  
  
  
• SAH-6B1-F
  Head Pulley Complete - 14" x 20"
  
  For 14" Belt Manlift - 2-1/2" Bore - Lagged
  
  
  
• SAH-6B1-H
  Head Pulley Complete - 14" x 20"
  
  For 14" Belt Manlift - 3" Bore - Lagged
  
  
  
• SAH-6B2-B
  Head Pulley Complete - 16" x 20"
  
  For 16" Belt Manlift - 2-11/16" Bore - Lagged
  
  
  
• P-259-12
  Lagging - Head Pulley
  
  64-1/2" of 12" Rough Top Lagging
  
  
  
• P-259-16
  Lagging - Head Pulley
  
  64-1/2" of 16" Rough Top Lagging
  
  
  
• SAH-6D1
  L-42 Hi-Box Complete
  
  Closed, with L-27 End Cap, Bearing, Oil Seal & Gasket
  
  
  
• SAH-6D3
  L-42HB Hi-Box Complete
  
  Open, with L-27 End Cap, Bearing, Oil Seal & Gasket - For "Saf-T-Stop" Brake
  
  
  
• P-341
  Bearing Supports
  
  For 2-11/16" Bearings
  
  
  
• L-42
  Hi-Box, Closed, Right
  
  Machined Casting Only
  
  
  
• L-42HB
  Hi-Box, Open, Right
  
  Machined Casting Only
  
  
  
• P-229
  Gaskets
  
  1 for each L-27 End Cap
  
  
  
• P-221GS
  Oil seal, 3/8 x 2-3/16"
  
  1 for each L-27 End Cap
  
  
  
• P-217
  Hi-Box Bolts & Nuts
  
  1/2 x 2" H. H. Cap screws with Lock Nuts & Bevel Washers - 4 for each Hi-Box
  
  
  
• L-45
  Head Circle (Left)
  
  For Angle Frame Manlift
  
  
  
• P-261
  Head Circle Bolts & Nuts
  
  1/2 x 1-3/4" H. H. Cap Screws with Lock Nuts & Bevel Washers - 2 for each Head Circle
  
  
  
• M-125A-12
  Head Shaft - 2-3/16" x 28-5/8"- With Keys
  
  For 12" Belt Manlift - 2.165" Coupler End
  
  
  
• M-125-12HB
  Head Shaft - 2-3/16" x 40-5/8" - With Keys
  
  For 12" Belt Manlift - 2" Coupler End - For 4-Pawl Brake
  
  
  
• M-125-12PB
  Head Shaft - 2-11/16" x 42-5/8" - With Keys
  
  For 12" Belt Manlift - With Sealmaster Bearings - For 4-Pawl Brake
  
  
  
• M-125-14
  Head Shaft - 2-3/16" x 30-5/8" - With Keys
  
  For 14" Belt Manlift - 2" Coupler End
  
  
  
• M-125-14P
  Head Shaft - 2-11/16" x 32-5/8" - With Keys
  
  For 14" Belt Manlift - With Sealmaster Bearings
  
  
  
• M-125A-14HB
  Head Shaft - 2-3/16" x 42-5/8" - With Keys
  
  For 14" Belt Manlift - 2.165" Coupler End - For 4-Pawl Brake
  
  
  
• M-125-14SA
  Head Shaft - 2-11/16" x 49-3/4" - With Keys
  
  For 14" Belt Manlift - For Electronic Brake and Safety Holdback
  
  
  
• M-125A-16
  Head Shaft - 2-3/16" x 32-5/8" - With Keys
  
  For 16" Belt Manlift - 2.165" Coupler End
  
  
  
• M-125-16HB
  Head Shaft - 2-3/16" x 44-5/8" - With Keys
  
  For 16" Belt Manlift - 2" Coupler End - For 4-Pawl Brake 
  
  
  
• M-125-16PB
  Head Shaft - 2-11/16" x 46-5/8" - With Keys
  
  For 16" Belt Manlift - With Sealmaster Bearings - For 4-Pawl Brake
  
  
  
• M-166-12
  Key, 1/2 x 1/2 x 7-1/2"
  
  For Head Pulley - For 12" Belt Manlift
  
  
  
• M-166-16
  Key,  1/2 x 1/2 x 12"
  
  For Head Pulley - For 16" Belt Manlift
  
  
  
• M-167
  Key, 1/2 x 1/2 x 3-3/16"
  
  For Keying Head Shaft to Coupler
  
  
  
• SAH-6E-79
  Control Arm Complete
  
  With Conduit Box & Mercury Switch - Nema 7 or 9
  
  
  
• SAH-4A-5A
  Flexible Coupler
  Stock Bore
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5C
  Flexible Coupler
  2" x 2-1/8"
  
  For 3HP or 5 HP
  
  
  
• SAH-4A-5E
  Flexible Coupler
  2-11/16" x 2-1/8"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5H
  Flexible Coupler
  1-7/8" x 2.165"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5J
  Flexible Coupler
  1-5/8" x 2.165"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5L
  Flexible Coupler
  2-1/8" x 2-7/16"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5N
  Flexible Coupler
  2" x 2-5/8"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5Q
  Flexible Coupler
  2-1/4" x 2-1/8"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5-OS
  Flexible Coupler
  2-11/16" x 2-5/8"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5-OS2
  Flexible Coupler
  2.165" x 2-5/8"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-5-OS4
  Flexible Coupler
  2-11/16" x 2-7/8"
  
  For 3HP or 5HP
  
  
  
• SAH-4A-3F-A
  Flexible Coupler -
  N-EUPEX # 250
  2-1/8" x 1-15/16"
  2" x 1-15/16"
  
  For 3HP
  
  
  
• SAH-4A-3F-C
  Flexible Coupler -
  N-EUPEX # 250
  2-3/8" x 2-11/16"
  2-1/8" x 2-15/16"
  
  For 3HP
  
  
  
• SAH-4A-3F-E
  Flexible Coupler -
  N-EUPEX # 250
  2-1/8" x 2.165"
  3-1/8" x 2-3/16"
  
  For 3HP
  
  
  
• SAH-4A-3F-G
  Flexible Coupler -
  N-EUPEX # 250
  2-1/8" x 2-7/16"
  
  For 3HP
  
  
  
• M-163
  Coupler Guard
  
  For Flexible Coupler
  
  
  
• M-157
  Coupling Washer
  
  For SAH-4A-5

Foot Assembly

• SAH-5
  Foot Assembly Complete
  
  With Legs, Circles, Foot Pulley, Foot Shaft, Bearing Boxes, Take-up Bolts and Anchor Plates-
  
  
• SAH-5-14
   
  
  For 14" Belt Manlift
  
  
• SAH-5A
  L-8 Leg Complete
  
  With Bearing Boxes Complete & Take-up Bolts
  
  
• SAH-5C
  L-20 & L-23 Rope Sheave Complete
  
  For Control Rope
  
  
• SAH-5D1
  Foot Pulley - 20 x 14" 1-5/8" Bore
  
  For 14" Belt Manlift
  
  
• L-8
  Legs
  
  Casting Only
  
  
• 7BA003
  #12 Washers
  
  For P-245
  
  
• M-160-12
  Foot Shaft - 12"
  
  1-5/8" x 31-1/2"
  
  
• M-160-14
  Foot Shaft - 14"
  
  1-5/8" x 33-1/2"
  
  
• M-160-16
  Foot Shaft - 16"
  
  1-5/8" x 35-1/2"
  
  
• P-241
  Bearing for L-6SA
  
  Sealmaster - 1-5/8"
  
  
• P-242C
  3/4" x 8" Machine Bolts With Lock Nuts
  
  Take-Up Bolts
  
  
• L-23
  Rope Sheave Wheel
  
  Machined Casting Only
  
  
• 7BA004
  #13 Washers
  
  For SAH-5C
  
  
• L-48RL
  Rope Guides
  
  For Control Rope
  
  
• M-307-14
  Debris Deflector
  
  For 14" Belt Manlift
  
  
• 7AC375
  #34T7115 Rope Clamps
  
  Pair for Control Rope

Steps