American Hoist and Manlift Inc. parts, service and repair for Humphrey, Ersham, Viola, Allis Chalmers Employees Belt Manlifts. American Hoist and Manlift specializes in all your hoist and manlifts repairs, parts and service for new and used equipment.

Angle Frame Manlift Parts List

 

Head Assembly

 

  • SAH-6
    Head Assembly Complete - GHC-3-RA

    NEMA 4 (Weatherproof) or
    NEMA 12 (Dust-tight):
    For 12" Belt Manlift
    For 14" Belt Manlift
    For 16" Belt Manlift
    NEMA 7 (Explosive-Vapors) or NEMA 9 (Explosive-Dust)
    For 12" Belt Manlift
    For 14" Belt Manlift
    For 16" Belt Manlift

  • SAH-6
    Head Assembly Complete - GHC-5-RA

    NEMA 4 (Weatherproof) or
    NEMA 12 (Dust-tight):
    For 12" Belt Manlift
    For 14" Belt Manlift
    For 16" Belt Manlift
    NEMA 7 (Explosive-Vapors) or NEMA 9 (Explosive-Dust):
    For 12" Belt Manlift
    For 14" Belt Manlift
    For 16" Belt Manlift

PLEASE NOTE: Above are the base prices for standard Humphrey Head Assemblies with 8" channel bedplates, 6'3" long.  Does not include option for "Saf-T-Stop" Brake and related material.  Prices for non-standard Head Assemblies are available upon request.

  • SAH-6B-A (Item #15)
    Head Pulley Complete - 12" x 20"

    For 12" Belt Manlift - 2 3/16" Bore - Lagged

  • SAH-6B-B
    Head Pulley Complete - 12" x 20"

    For 12" Belt Manlift - 2-11/16" Bore - Lagged


  • SAH-6B-D
    Head Pulley Complete - 12" x 20"

    For 12" Belt Manlift - 1-15/16" Bore-Lagged


  • SAH-6B-OH-NL
    Head Pulley Complete - 12" x 20"

    For 12" Belt Manlift - 2-15/16" Bore - Oversized Hub - Not Lagged


  • SAH-6B1-B
    Head Pulley Complete - 14" x 20"

    For 14" Belt Manlift - 2-11/16" Bore - Lagged


  • SAH-6B1-F
    Head Pulley Complete - 14" x 20"

    For 14" Belt Manlift - 2-1/2" Bore - Lagged


  • SAH-6B1-H
    Head Pulley Complete - 14" x 20"

    For 14" Belt Manlift - 3" Bore - Lagged


  • SAH-6B2-B
    Head Pulley Complete - 16" x 20"

    For 16" Belt Manlift - 2-11/16" Bore - Lagged


  • P-259-12
    Lagging - Head Pulley

    64-1/2" of 12" Rough Top Lagging


  • P-259-16
    Lagging - Head Pulley

    64-1/2" of 16" Rough Top Lagging


  • SAH-6D1
    L-42 Hi-Box Complete

    Closed, with L-27 End Cap, Bearing, Oil Seal & Gasket


  • SAH-6D3
    L-42HB Hi-Box Complete

    Open, with L-27 End Cap, Bearing, Oil Seal & Gasket - For "Saf-T-Stop" Brake


  • P-341
    Bearing Supports

    For 2-11/16" Bearings


  • L-42
    Hi-Box, Closed, Right

    Machined Casting Only


  • L-42HB
    Hi-Box, Open, Right

    Machined Casting Only


  • P-229
    Gaskets

    1 for each L-27 End Cap


  • P-221GS
    Oil seal, 3/8 x 2-3/16"

    1 for each L-27 End Cap


  • P-217
    Hi-Box Bolts & Nuts

    1/2 x 2" H. H. Cap screws with Lock Nuts & Bevel Washers - 4 for each Hi-Box


  • L-45
    Head Circle (Left)

    For Angle Frame Manlift


  • P-261
    Head Circle Bolts & Nuts

    1/2 x 1-3/4" H. H. Cap Screws with Lock Nuts & Bevel Washers - 2 for each Head Circle


  • M-125A-12
    Head Shaft - 2-3/16" x 28-5/8"- With Keys

    For 12" Belt Manlift - 2.165" Coupler End


  • M-125-12HB
    Head Shaft - 2-3/16" x 40-5/8" - With Keys

    For 12" Belt Manlift - 2" Coupler End - For 4-Pawl Brake


  • M-125-12PB
    Head Shaft - 2-11/16" x 42-5/8" - With Keys

    For 12" Belt Manlift - With Sealmaster Bearings - For 4-Pawl Brake


  • M-125-14
    Head Shaft - 2-3/16" x 30-5/8" - With Keys

    For 14" Belt Manlift - 2" Coupler End


  • M-125-14P
    Head Shaft - 2-11/16" x 32-5/8" - With Keys

    For 14" Belt Manlift - With Sealmaster Bearings


  • M-125A-14HB
    Head Shaft - 2-3/16" x 42-5/8" - With Keys

    For 14" Belt Manlift - 2.165" Coupler End - For 4-Pawl Brake


  • M-125-14SA
    Head Shaft - 2-11/16" x 49-3/4" - With Keys

    For 14" Belt Manlift - For Electronic Brake and Safety Holdback


  • M-125A-16
    Head Shaft - 2-3/16" x 32-5/8" - With Keys

    For 16" Belt Manlift - 2.165" Coupler End


  • M-125-16HB
    Head Shaft - 2-3/16" x 44-5/8" - With Keys

    For 16" Belt Manlift - 2" Coupler End - For 4-Pawl Brake 


  • M-125-16PB
    Head Shaft - 2-11/16" x 46-5/8" - With Keys

    For 16" Belt Manlift - With Sealmaster Bearings - For 4-Pawl Brake


  • M-166-12
    Key, 1/2 x 1/2 x 7-1/2"

    For Head Pulley - For 12" Belt Manlift


  • M-166-16
    Key,  1/2 x 1/2 x 12"

    For Head Pulley - For 16" Belt Manlift


  • M-167
    Key, 1/2 x 1/2 x 3-3/16"

    For Keying Head Shaft to Coupler


  • SAH-6E-79
    Control Arm Complete

    With Conduit Box & Mercury Switch - Nema 7 or 9


  • SAH-4A-5A
    Flexible Coupler
    Stock Bore

    For 3HP or 5HP


  • SAH-4A-5C
    Flexible Coupler
    2" x 2-1/8"

    For 3HP or 5 HP


  • SAH-4A-5E
    Flexible Coupler
    2-11/16" x 2-1/8"

    For 3HP or 5HP


  • SAH-4A-5H
    Flexible Coupler
    1-7/8" x 2.165"

    For 3HP or 5HP


  • SAH-4A-5J
    Flexible Coupler
    1-5/8" x 2.165"

    For 3HP or 5HP


  • SAH-4A-5L
    Flexible Coupler
    2-1/8" x 2-7/16"

    For 3HP or 5HP


  • SAH-4A-5N
    Flexible Coupler
    2" x 2-5/8"

    For 3HP or 5HP


  • SAH-4A-5Q
    Flexible Coupler
    2-1/4" x 2-1/8"

    For 3HP or 5HP


  • SAH-4A-5-OS
    Flexible Coupler
    2-11/16" x 2-5/8"

    For 3HP or 5HP


  • SAH-4A-5-OS2
    Flexible Coupler
    2.165" x 2-5/8"

    For 3HP or 5HP


  • SAH-4A-5-OS4
    Flexible Coupler
    2-11/16" x 2-7/8"

    For 3HP or 5HP


  • SAH-4A-3F-A
    Flexible Coupler -
    N-EUPEX # 250
    2-1/8" x 1-15/16"
    2" x 1-15/16"

    For 3HP


  • SAH-4A-3F-C
    Flexible Coupler -
    N-EUPEX # 250
    2-3/8" x 2-11/16"
    2-1/8" x 2-15/16"

    For 3HP


  • SAH-4A-3F-E
    Flexible Coupler -
    N-EUPEX # 250
    2-1/8" x 2.165"
    3-1/8" x 2-3/16"

    For 3HP


  • SAH-4A-3F-G
    Flexible Coupler -
    N-EUPEX # 250
    2-1/8" x 2-7/16"

    For 3HP


  • M-163
    Coupler Guard

    For Flexible Coupler


  • M-157
    Coupling Washer

    For SAH-4A-5


Foot Assembly

 

  • SAH-5
    Foot Assembly Complete

    With Legs, Circles, Foot Pulley, Foot Shaft, Bearing Boxes, Take-up Bolts and Anchor Plates-

  • SAH-5-14
     

    For 14" Belt Manlift

  • SAH-5A
    L-8 Leg Complete

    With Bearing Boxes Complete & Take-up Bolts

  • SAH-5C
    L-20 & L-23 Rope Sheave Complete

    For Control Rope

  • SAH-5D1
    Foot Pulley - 20 x 14" 1-5/8" Bore

    For 14" Belt Manlift

  • L-8
    Legs

    Casting Only

  • 7BA003
    #12 Washers

    For P-245

  • M-160-12
    Foot Shaft - 12"

    1-5/8" x 31-1/2"

  • M-160-14
    Foot Shaft - 14"

    1-5/8" x 33-1/2"

  • M-160-16
    Foot Shaft - 16"

    1-5/8" x 35-1/2"

  • P-241
    Bearing for L-6SA

    Sealmaster - 1-5/8"

  • P-242C
    3/4" x 8" Machine Bolts With Lock Nuts

    Take-Up Bolts

  • L-23
    Rope Sheave Wheel

    Machined Casting Only

  • 7BA004
    #13 Washers

    For SAH-5C

  • L-48RL
    Rope Guides

    For Control Rope

  • M-307-14
    Debris Deflector

    For 14" Belt Manlift

  • 7AC375
    #34T7115 Rope Clamps

    Pair for Control Rope

Steps

 

  • SAH2-12A
    Step Complete

    For 12" Belt Manlift - With L-19W Rollers, P-202-3 Pins, M-300 Buffer Plates and L-68 Roller Assemblies

  • SAH2-16A
    Step Complete

    For 16" Belt Manlift - With L-19W Rollers, P-202-3 Pins, M-300 Buffer Plates and L-68 Roller Assemblies

  • SAH2-14AFW
    Step Complete

    For 14" Belt Manlift - With L-72 Rollers, P-202-3 Pins, and L-68 Roller Assemblies

  • M-131A-12
    Step Tread with Safety-walk

    For 12" Belt Manlift

  • M-133A-16
    Step Tread with Safety-walk

    For 16" Belt Manlift

  • P-321-14
    3M Non-Skid Safety-walk

    For 14" Step Treads

  • SAH-2D
    L-18 Step Bracket Complete

    With L-19 Roller and P-202-3 Pin

  • L-18-T
    Step Bracket Only

    Drilled Casting

  • M-139-14
    Step Bar

    For SAH-2B Step

  • M-138A-12
    Step Bar

    For SAH-12A Step

  • M-140A-16
    Step Bar

    For SAH2-16A Step

  • M-139FW-14
    Step Bar

    For SAH2-14AFW Step

  • L-19
    Step Roller with Bushing

    For SAH2A, B & C Steps

  • L-72
    Step Roller with Bushing

    For SAH2-12AFW, 14AFW & 16AFW Steps

  • P-202-3
    Step Roller Pins #3
    Less Zerk

    For L-19 & L-19W Rollers

  • P-202-3AGF
    Step Roller Pins #3A
    With Zerk - Threaded

    For L-72 Rollers

  • M-300
    Buffer Plates
    #1743 Grease Fittings

    For SAH-12A, 14A & 16A Steps

  • P-318A
    Nylatron Bearings

    For L-68 Roller Assemblies

  • L-68
    Casting Only

    For L-68AN

  • P-281A
    5/16 x 1-1/4" Elevator Bolts with Lock Nuts and Washers

    For attaching Belt Splice to Belt

  • L-55
    Guarded Type Handholds with Bolts

Guide Rails, Splice Plates, Frame Braces, Belts

 

  • M-12
    Frame Braces

    For 12" Belt Manlift

  • M-16
    Frame Braces

    For 16" Belt Manlift


PVC Solid Woven Polyester Belting - Tested and Certified For Manlift
Service - For Manlifts up to 150'0" Pulley Centers

  • SAB012
    Price Per Foot

    12" wide
  • SAB014
    Price Per Foot

    14" wide
  • SAB012
    Price Per Foot

    16" wide
PVC Solid Woven Polyester Belting - Tested and Certified for Manlift
Service - For Manlifts over 150'0" Pulley Centers
  • SAD014
    Price Per Foot

    14" wide
  • SAD012
    Price Per Foot

    16" wide

 

Safety Devices and Electrical Cords 

  • SAH-1CA-L
    Safety Stop Device - With OPAR Micro Switch - Left hand - Old Style

    For NEMA 4 or NEMA 12 Conditions

  • SAH-1CC-L
    Safety Stop Device - With EXAR Micro Switch - Left Hand- Old Style

    For NEMA 7 or NEMA 9 Conditions

  • SAH-1CA-R
    Safety Stop Device - With OPAR Micro Switch - Right Hand - Old Style

    For NEMA 4 or NEMA 12 Conditions

  • SAH-1CC-R
    Safety Stop Device - With EXAR Micro Switch - Right Hand - Old Style

    For NEMA 7 or NEMA 9 Conditions

  • SAH-12A
    Overhead Safety Stop Device - With OPAR Micro Switch - 12"

    For NEMA 4 or NEMA 12 Conditions

  • SAH-12B
    Overhead Safety Stop Device - With OPAR Micro Switch - 14"

    For NEMA 4 or NEMA 12 Conditions

  • SAH-12C
    Overhead Safety Stop Device - With OPAR Micro Switch - 16"

    For NEMA 4 or NEMA 12 Conditions

  • P-307-4
    Micro Switch - OPAR

    For SAH-11 & SAH-12 Stop Devices For NEMA 4 or 12

  • P-307-9
    Micro Switch - EXAR

    For SAH-11 & SAH-12 Stop Devices For NEMA 7 or 9

  • P-303-12
    Control Relay - AB700 120 Volt with Enclosure

    For NEMA 12

  • P-303-7
    Control Relay - AB700 120 Volt with Enclosure

    For NEMA 7

  • P-304-4
    Reset Button - AB800
    Old Style

    For NEMA 4 or 12

  • P-304-9
    Reset Button - AB800
    Old Style

    For NEMA 7 or 9

  • P-314GS
    Mercury Switch - G10SZ

    For Control Arm and Moveable Hoods

  • P-251B
    EXUN Unilet

    For Control Arm and Moveable Hoods NEMA 7 or 9

  • M-301-14
    Moveable Safety Cone
    Hood - 14"

    NEMA 4 or 12

  • M-301-12X
    Moveable Safety Cone
    Hood - 12"

    NEMA 7 or 9

  • M-301-16X
    Moveable Safety Cone
    Hood - 16"

    NEMA 7 or 9

  • M-302-14
    Stationary Safety Cone
    Hood - 14"

    For 14" Belt Manlift

  • M-304-12A
    Treadle Complete - 12"

    With OPAR

  • M-304-12C
    Treadle Complete - 12"

    With OP-XR3

  • M-304-14A
    Treadle Complete - 14"

    With OPAR

  • M-304-14C
    Treadle Complete - 14"

    With OP-XR3

  • M-304-16A
    Treadle Complete - 16"

    With OPAR

  • M-304-16C
    Treadle Complete - 16"

    With OP-XR3

  • M-313A
    Ladder Rungs

    With Bolts

  •  

    Angle Guide Rails -
    2 x 1-1/2 x 1/4" Angle

    Drilled for Splice Plates and Ladder Rungs, and Painted

    • Back To Top Of Page •

    • Site Navigation Map •
    Contact - American Hoist and Manlift, Inc.

     

    Powered by Outdoor Network - Website Hosting, Design & Marketing

    Outdoor Network - Website Design, Hosting & Marketing

    American Hoist and Manlift Inc. parts, service and repair for Humphrey, Ersham, Viola, Allis Chalmers Employees Belt Manlifts. American Hoist and Manlift specializes in all your hoist and manlifts repairs, parts and service for new and used equipment.